Galvanized High Tensile Steel Wire Mesh Rockfall Protection Mesh for Slope Stabilization

• Customization: Available
• After-sales Service: Installation Video
• Warranty: 20years
• Model NO.: LT-slope mesh
• Material: Galvanized Iron Wire
• Application: Protecting Mesh
• Hole Shape: Diamond
• Weave Technique: Plain Weave
• Surface Treatment: Galvanized
• Wire Diameter: 3mm, 4mm
• Material 2: Zn- Al Coated Steel Wire
• Hole Size: 8X14mm, etc
• Width: 3m, 3.5m, etc
• Mesh Tensile Strength: 150kN/M
• Wire Tensile Strength: 1770n/mm2
• Diagonal: 8X14mm
• Keyword 1: Slope Protection Net
• Keyword 2: Rockfall Protection Net
• Keyword 3: Slope Security Wire Mesh
• Keyword 4: Rockfall Netting
• Keyword 5: Rockfall Net
• Keyword 6: Security Fence
• Keyword 7: Rockfall Barrier Mesh
• Transport Package: in Roll, Put Into Container Directly
• Specification: 3x30m
• Trademark: longteng
• Origin: China
• HS Code: 7314140000
• Production Capacity: 5000m2/Month
• Package Size: 120.00cm * 100.00cm * 80.00cm
• Package Gross Weight: 1000.000kg

Product Description

Product Description

 

Material: High carbon steel wire.
Surface treatment: Hot dipped galvanized, zinc-aluminum coated.
Zinc thickness: No less than 150 g/m2.
Wire diameter: 3 mm, 4 mm.
Mesh type: Rhomboid hole.
Mesh size : 65 mm inscribed circle diameter.
Tensile strength: Minimum 1770 MPa.
Braking load of single wire: 12.5 kN.
Mesh roll width: 1-3.5 m.
Mesh roll length:10-30 m.
Fitting : Steel anchor, claw type spike plate, soil or rock nails,clips, sewing rope, boundary rope. (The steel anchor is made
ofdeformed steel bar of 25 mm diameter)

 

 

High-tensile steel wire slope protection system rockfall netting mesh
Components:
The system consists of four main components that are carefully coordinated with each other.

item	value
Place of Origin	China
	Hebei
Material	Galvanized Steel Wire
Type	Chain Link Mesh
Application	Protecting Mesh
Weave Style	Plain Weave
Technique	woven
Model Number	LT- Slope protection mesh
Brand Name	Longteng Slope protection mesh
Processing Service	Cutting
Delivery Time	8-14 days
Material	Zn-Al Alloy steel wire
Wire Tensile Strength	1770N/mm2
Mesh tensile strength	150KN/m
Diagonal	8x14mm
Wire Diameter	3mm
Mesh Width	65mm

1. Steel wire mesh
Steel wire mesh is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2.

2. Spike Plates

Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the mesh.These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope.The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm).



3. Connection clips
The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces.These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral.

4. Soil or rock nails
Adapted to the local soil and rock static requirements, the mesh can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling.Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm).Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows.